Descripción
FEATURES
Federal Signal’s Fireball® strobe light is a solution to a wide variety of stationary and vehicular warning requirements.
The 24VDC Model FB2PST-I features a voltage in-rush limiting PCB design that provides greater compatibility with factory automation control systems and less electrical interference with in-rush sensitive devices.
The Fireball features a lens that twists off for quick lens and lamp replacements. The base features an integrated 1/2-inch NPT pipe mount base as well as the three holes required for surface mount configurations. The Fireball lens and base design provides a water-tight, dust-tight and corrosion resistant Type 4X rating.
The Fireball is especially effective in industrial hazard warning, process control, status indication and in areas with high ambient noise levels. It is ideal for industrial applications where a vibration-resistant light is required.
SPECIFICATIONS
| Mount | 1/2' Pipe |
| Surface | |
| Voltage | 12-24VDC |
| 120VAC | |
| 240VAC | |
| Operating Current | 1.70-0.70 Amps from 12-24VDC |
| 0.25 Amps at 120VAC | |
| 0.20 Amps at 240VAC | |
| Light Source/Lamp Style | Strobe Tube |
| Lamp Life | 10,000 Hours |
| Flash Rate/Minute | 80 |
| Peak Candela | 1,000,000 |
| Effective Candela | 300 |
| Operating Temperature Minimum | -31 °F |
| Operating Temperature Maximum | 150 °F |
| Enclosure Rating | Type 4X |
| Ingress Protection (IP) | IP66, IP69K |
| Dome Colors | Amber |
| Blue | |
| Clear | |
| Green | |
| Red | |
| Magenta | |
| Net Weight | 2 lb |
| Shipping Weight | 2.12 lb |
| Height | 5.250 in |
| Diameter | 4.100 in |
Valoraciones
No hay valoraciones aún.